How Much Is A 2 Ton AC Unit?

How do I know what size air conditioner to buy?

To calculate the size, simply multiply the length times the width of the room or area to be cooled.

Then, as a practical number, multiply that total times 25 BTU.

This allows ample cooling, whether it is a rainy, moist day or a hot, sunny, humid day..

How many tons of AC do I need per square foot?

0.0016 tonsSimple answer: You need 0.0016 tons of AC per square foot. In general, for every 600 sq ft, you need 1 ton of AC. This is a general estimate. You can insert the area and calculate how many tons of AC you need per certain square footage.

How much power does a 2 ton air conditioner use?

A 2-ton AC at this SEER rating is approximately 15 amps; 3-tons is 18 amps; 4-tons is 21 amps. Next, calculate the wattage consumed. A typical whole-home air conditioner uses a 240-volt power outlet. Multiply the amps by 240 watts, which equals 4,320 watts.

What is the difference between a 2 ton and 3 ton air conditioner?

A two-and-a-half ton air conditioner has 30,000 BTU’s and can cool a home sized 1,201 to 1,500 square feet while a three ton unit has 36,000 BTU’s and is designed for homes 1,501 to 1,800 square feet.

Is a 2 ton AC big enough?

Pro Tip: as a rule of thumb, the maximum AC unit size you need to install should not be more than 15% more than the BTU’s you need to cool your house. This means that if your house requires a 24,000 BTU unit (2 tons), you should not install one that is larger than 30,000 BTU’s (3 tons) to maintain energy efficiency.

How many square feet does a 3 ton AC unit cover?

ZONE 1ZONE 22.5 Tons1201 – 1500 sf1251 – 1550 sf3 Tons1501 – 1800 sf1501 – 1850 sf3.5 Tons1801 – 2100 sf1851 – 2150 sf4 Tons2101 – 2400 sf2151 – 2500 sf3 more rows

What SEER rating should I buy?

A higher SEER rating provides greater energy efficiency in certain conditions. … A 13 or 14 SEER rating doesn’t necessarily mean a unit is inefficient. Most older A/C systems are rated at around 8 or 9, so even the lowest available SEER rated system you buy today will be much more energy efficient.

How much area does a 1.5 ton AC cover?

A 1.5 ton AC will be adequate for a room size ranging from 120 to 190 square feet and you may need a 2 ton air conditioner for a room size ranging from 190 to 300 square feet.

Which AC is best for 300 sq ft room?

3. If a Room sq ft is above 201-300 sq ft, then go for 1.25 or 1.5 Ton AC. 4. If a Room is big say above 301-500 sq ft, then better go for 1.5 Ton AC.

How much is a 2 ton AC unit installed?

Cost of a 2 Ton AC Unit Installed Many factors influence the cost of a 2-ton AC unit and installation, including efficiency and whether this is a replacement or installation with new ducts. A change out, meaning only replacing the unit, costs around $2,800 – $3,000, while a complete installation costs about $4,000.

How many square feet does a 2 ton AC cool?

Units that are 2 tons can cool off 901-1200 square feet spaces. Units that are 2.5 tons can cool off 1201-1500 square feet, etc.

What size central air conditioner do I need for a 1500 sq ft home?

STEP 1: Determine how many BTUs of heating and tons of AC you needHouse Square FootageBTUs Needed1,000 – 1,20021,0001,200 – 1,40023,0001,400 – 1,50024,0001,500 – 2,00030,00010 more rows

What size AC do I need for 1700 sq ft?

Furnace and Air Conditioner size for a detached 2-storey homeHouse square footage *Furnace Output [BTU/hr]Air Conditioner size [ton]up to 1300 sq ft40,000 BTU/hr1.5 ton1300 to 1700 sq ft45,000 BTU/hr1.5 ton1700 to 2500 sq ft55,000 BTU/hr2 to 2.5 ton2500 to 3500 sq ftup to 65,000 BTU/hr2.5 to 3 ton3 more rows•May 26, 2017

How many ton AC do I need for 1600 square feet?

4.0 tonsAssuming the minimum cooling capacity of 400 square feet per ton for your HVAC unit, a 1600 square foot home will require 4.0 tons of air conditioning to cool.